Table of Contents
- Why Access Ramp Design Matters for Public Buildings
- Getting the Slope Right
- Width, Length and Level Landings
- Handrails and Non-Slip Surfaces
- Choosing the Right Materials for Your Ramp
- Practical Considerations: Space, Location and Planning
- Why Professional Installation Matters
- Making an Informed Decision
- Speak to APS about Access Ramp Design
A ramp bolted onto an entrance is not the same thing as genuine access. Good access ramp design brings several requirements together at once: the right gradient, sufficient width, level landings in the right places, handrails people can actually use, and a surface that stays safe in all weather. Get any one of these wrong and the ramp stops working for the people it was meant to help.
For public buildings, schools, healthcare sites and other commercial buildings, this is not optional. The Equality Actand UK building regulations set out what compliant access looks like, and Approved Document M and BS 8300-2:2018 provide the detailed technical guidance behind it. This guide walks through the key factors that shape a well-designed, compliant access ramp.
Why Access Ramp Design Matters for Public Buildings
Under the Equality Act, organisations responsible for public buildings and commercial buildings have a duty to make reasonable adjustments for disabled people, including wheelchair users and people using mobility scooters. Removing physical barriers at the entrance is one of the most direct ways to do this, giving visitors and staff with limited mobility genuine independence rather than a workaround.
Getting the design right the first time matters as much as having a ramp at all. A ramp with too steep a gradient, too little width, or landings in the wrong place can still leave people struggling, and can leave an organisation short of its legal obligations despite good intentions.
Getting the Slope Right
Gradient is the starting point of any access ramp design, and the rule is straightforward: the shallower the slope, the easier the access. As a basic UK guideline, public access ramps are typically designed to a maximum gradient of 1:15, while ramps for private homes and dwelling access can go as steep as 1:12.
That said, this is a simplified starting point rather than the full picture. The proper slope for a given ramp depends on its length between landings, and the detailed requirements sit within Building Regulations Approved Document M and BS 8300-2:2018. A ramp’s rise (the height it climbs) against its run (the distance it covers) needs to be calculated properly at the design stage, not estimated on site, which is why early technical input is worth having before anything is installed.

Width, Length and Level Landings
Ramp length and gradient work together. A longer ramp needs to climb the same height more gradually, which is one reason gradient cannot be decided in isolation from the space available. As a general UK guideline, a minimum width of around 1200mm should be allowed, taking into account the space needed on a landing clear of any door swing paths, so wheelchair users have room to manoeuvre comfortably.
Level landings are just as essential as the ramp itself. A flat, level platform is needed wherever a ramp changes direction, and for a 1:15 slope, a landing should typically be provided at least every 5 metres along the run. Skipping this is one of the most common ways an otherwise reasonable ramp becomes unsafe or non-compliant.
Handrails and Non-Slip Surfaces
Handrails need to offer a comfortable grip along the entire length of the ramp: smooth, continuous, and not cold to the touch, since these details matter to the people relying on them most. Where a guardrail is required, a minimum height of 1100mm is the standard UK benchmark.

The walking surface matters just as much as the rail. A slip-resistant surface with integrated drainage helps shed water, snow and ice, keeping the ramp usable for outdoor use throughout the year rather than only in dry conditions. A non-slip, well-drained surface, paired with a secure handrail, is what actually ensures safety in everyday use, not just on a dry test day.
Choosing the Right Materials for Your Ramp
Materials affect more than appearance. Timber ramps are quick to fit and can be styled to suit a building, but they drain poorly and typically need more regular maintenance over time. Poured concrete ramps also drain poorly and are difficult to modify once installed, even though they need relatively little upkeep day to day.
A galvanised steel ramp system built with Kee Klamp fittings offers good surface drainage, straightforward specification, and is both low maintenance and easy to modify or repair without the higher repair costs that come with timber or concrete. Where flexibility matters more than permanence, for example at a school, modular building or site with changing needs, a modular aluminium ramp system offers an alternative: ramps that can be installed, reconfigured or removed in under a day using just a bolt driver, with adjustable feet to suit uneven ground. The right choice of materials depends on whether the site needs a permanent installation or a flexible one.
Practical Considerations: Space, Location and Planning
Every site brings its own constraints. Available space, the building’s location, and the layout at the top and bottom of the proposed ramp all shape what can realistically be installed. On some sites, particularly listed buildings or those in a conservation area, planning permission or heritage consent may need to be considered before any work begins. It is worth raising this with your local authority or conservation officer early, so the design process is not derailed later on.
Why Professional Installation Matters
Gradient, width, landings, handrails and surface all need to work together, not just individually meet a number on a spec sheet. Professional installation, backed by proper design input, is what turns a set of separate requirements into a ramp that is genuinely safe, compliant and easy for visitors to use. It also reduces the risk of costly rework later, when a detail missed at the design stage has to be corrected on site.
Making an Informed Decision
Good access ramp design is not complicated, but it does require getting several details right together. A ramp designed with the correct gradient, width, landings, handrails and surface from the outset gives visitors, staff and residents genuine independence, and gives building owners confidence that they are meeting their obligations under the Equality Act and UK building regulations.
Speak to APS about Access Ramp Design
Whether you need a permanent steel ramp system or a flexible modular solution for a public or commercial building, APS can help you get the design right from the start. Our team will survey your site, advise on gradient, width and landing requirements, and support you through design and installation. Get in touch to discuss your access ramp project.