RoofSafe Anchor for Standing Seam Roof Systems
The design of the anchor is neat and unobtrusive, limiting any visual impact to the building. Anchors are constructed from high grade alloy and can be colour coated to match the roof finish.
Aluminium provides excellent future potential for recycling, uses sustainable resources in the production process and has a high level of corrosion resistance. In addition customers benefit from reduced freight charges as consignments of these anchors are lighter then other products and the anchors are easier to handle during installation works.
This anchor can be used on the following roof constructions:
- Aluminium 300mm to 500mm profiles. 0.7mm material gauge
- Steel 300mm to 500mm profiles. 0.7mm material gauge
Roof sheets should be non-fragile and validated as suitable for installation through testing or calculation.
Fitting the anchors
The anchors are easily fitted from the top of the roof structure using aluminium clamps which do not penetrate the roof sheet. The number and size of clamps have been calculated to counter the overturning moment applied by the anchor in the first stage of activation and resist the shear load in the second stage of activation when the energy absorber deploys.
Clamps are available to suit a range of different standing seam roof profiles. All offer non-penetrative fixing solutions.
What roof system can the anchors be fitted to?
Anchors can only be installed on roof systems that have been validated as capable of supporting the distributed loads applied in the event of a fall. Uniline offer alternative solutions for roofs which are not suitable.
This predictable distributed load can be used to validate the roof systems suitability for use as a structural anchor and is typically less than 1kN/sq.m.
Which cable systems will work with the anchors?
The anchors shown above are used for integrating Uniline’s cable fall protection systems into your building, thereby facilitating safe access.
Type A – End Anchors
Type B – Corner Anchors
Type C – Variable Anchors
Type D – Intermediate Anchors
The type D anchor may also be used as a single point anchor. (EN795 Class A2)
For further information, please contact Uniline’s Technical Department.
Guaranteed
Roofsafe Anchors for Standing Seam Roof Systems are tested to exceed the standards of EN795, are CE marked and come with a 25 year guarantee for performance and corrosion resistance. (subject to terms and conditions)
